Hardware

100 Mounting Screws Phillips 1 1/2 Inch "Round Head

HVC premium hardware set with hexagon socket screws. 2 of the screws are red colored. These are intended to install them in the front axle holes on the nose. So you always know the same, where your board is the nose. 2 screws hexagon socket 1" red 6 screws Hexagon socket 1" black 8 nuts

HVC premium hardware set hexagon socket screws. 2 of the screws are gold colored. These are therefür thought to install them in the front axle holes on the nose. So you always know the same, where the nose is on your board. 2 screws hexagon socket 1" gold 6 screws hexagon socket 1" black 8 nuts

Genuine Parts Hardware is manufactured to the highest standard. Each set has "nylon lock" nuts and large screw heads with Independent emblem.

100 mounting screws cross recess 1 1/4 inch

100 mounting screws hexagon socket 1 1 / 4 inch

1 set longboard screws and nuts 1.25 inch

4 Spacer 10mm for Standart Wheels

100 mounting screws cross recess 1 1/2 inch

HVC premium hardware set with Phillips screws. 2 of the screws are red-colored and dafür thought to install them in the front axle holes at the nose. So you always know the same, where your board front or the nose is. 2 screws Phillips 1" red 6 screws Phillips 1" black 8 nuts

8 screws with nuts 1 inch

1 set of screws with nuts 1 1/8 inch hexagon socket

8 screws with nuts 2 inch

100 mounting screws cross recess 2 inch

1 Sheet Slip Tape 9" x 31.75" Slip Tape is a new coating that dramatically improves deck performance during slides. It's a griptape-like film that's only 25 thousandths of an inch thick (0.025") and works roughly like Ptex - the stuff most people know as the undercoating on snowboards and skis. Basically, it's just clear plastic, but has a slightly milky tint to it. It's applied just like grip tape, only to the underside of the board. But be careful - this stuff sticks like a pig! You should have some experience with applying griptape and make sure it sits cleanly and without air bubbles the first time, because once it sticks, you can't get it off your deck without taking some layers of paint down with it! (If you order Slip Tape together with a deck, we advise you to make use of our installation service for only 3 Euro). Slip Tape makes your deck a bit smoother than normal varnished wood - but not deadly slippery - which makes slides much easier, faster and further. It also stabilizes your board and protects the graphics from scratches. Even after the wildest stunts, your board will look as good as new. The secret of Slip Tape is the super dense molecular structure of the polymer it is made of. This means there are virtually no cracks or scratches in the film, which stays nice and smooth. No more annoying waxing, just ride Slip Tape!

100 Mounting Screws Phillips 1 1/4 Inch "Round Head

1 set of bolts with nuts 7 / 8 inch cross

100 mounting screws hexagon socket 1 1 / 8 inch

1 set of screws with nuts 1 inch hexagon socket

100 Skateboard nuts (5 / 32" | 10mm)

100 Mounting Screws Phillips 1 1/8 Inch "Round Head

1 set of screws with nuts 7 / 8 inch hexagon socket

100 mounting screws cross recess 1 inch

HVC premium hardware set cross recess. 2 of the screws are gold colored. These are intended to install them in the front axle holes on the nose. So you always know the same, where your board is the nose. 2 screws Phillips 1" gold 6 screws Phillips 1" black 8 nuts

Low Hardware Set Phillips 7 / 8" no risers 8 screws 7 / 8" Phillips (xtra short) 8 nuts Nylock 8 Speedwashers 4 axle nuts 4 spacers

100 mounting screws 1" hexagon socket

Standard Hardware Set 1 1/8" Phillips 8 Bolts 1 1/8" Phillips 8 Nuts Nylock 8 Speedwashers 4 Axle Nuts 4 Spacers 2 H-Riserpads 3mm

1 set of screws with nuts 1 1/4 inch hexagon socket

100 mounting screws hexagon socket 7 / 8 inch

1 set of bolts with nuts 1 1/8 inch cross

100 mounting screws cross recess 7 / 8 inch

Longboard Hardware Set Phillips 1 1/4" 8 Screws 1 1/4" Cross 8 Nuts Nylock 8 Speedwashers 4 Axle Nuts 4 Spacers 2 Longboard Riser Pads 6mm